The Eagle AXS rear derailleur is the brain of the group and was developed specifically for optimal switching performance with electric motor. The circuit under load and on rough ground now works even more precisely. This gives you even more confidence in the bike under extreme load and you can concentrate exclusively on the trail. For a better protection of the derailleur in falls provides the new Overload-Clutch. It decouples the rear derailleur under extreme loads for a short time, so that it can avoid the load and the electric motor is protected from damage. However, the rear derailleur immediately jumps back into the engaged gear. As an extremely positive side effect, the rear derailleur hanger and derailleur hanger are better protected in the event of falls. In addition, a 10-millimeter shorter rear derailleur arm protects the rear derailleur from contact with the ground. For more chain wrap and thus better shifting performance, the parallelogram has slid a little further forward.

NOTE: Battery attached illustrative purpose only, this product will be shipped without a battery.

Technical specifications:

Material cage: aluminum / titanium
Technology: X-Actuation, Cage Lock, Type 3.0 Roller Bearing Clutch, X-Sync
Gears: 12-speed
Cage: long version
Roller blades: 12 teeth (top) and 14 teeth (bottom) X-Sync
Compatibility: SRAM XX1 and X01 Eagle AXS switching groups
Waterproof: yes (IP69K)
Colour: Black*

• battery and charger not included